Table of Contents

• Multiscale Approach to Texture-Microstructure Coupling
• EDS Assisted Phase Differentiation in Orientation Imaging Microscopy
• Microstructural Evolution of a Commercial 0.04%C Steel During Batch Annealing
• Characterization of Global and Local Textures in Hot Rolled CGO Fe3%Si
• Mechanical Properties of Ultra Clean Low C/Cr Stabilized Annealed Sheets
• Determination of the Work Hardening Exponent by the Hollomon and Differential Crussard-Jaoul Analyses of Cold Drawn Ferrite-Pearlite Steels
• Microstructure and Self-Affine Fracture Surface Parameters in Steel
• Dislocation Mechanisms and Plasticity of Quasicrystals: TEM Observations in Icosahedral AlPdMn
• In Situ Deformation at 850°C of Standard and Rafted Microstructures of Nickel Base Superalloys
• Compressive Mechanical Properties of Nanostructured Intermetallic Alloys Al3Ti-X (X = Mn or Fe)
• The Effect of Hot Rolling on Room Temperature Ductility of a NiAl Intermetallic Compound
• Grain Refinement during Superplastic Deformation of Coarse-Grained Al-Mg-Cu Alloys
• Strain-Resistivity Behavior of a Ti-45Ni-5Cu Shape Memory Alloy during Superelastic and SATWME Cycling
• Micro and Macromechanical Study of Stress-Induced Martensitic Transformation in a Cu-Al-Be Polycrystalline Shape Memory Alloy
• Thermal Stability, Structure and Mechanical Properties of TiSiN Coatings Prepared by Reactive DC Magnetron Co-Sputtering
• Joining of Silicon Nitride to Metal (Mo and Ti) Using a Cu-Foil Interlayer
• Properties of AlN-Based Magnesium-Matrix Composites Produced by Pressureless Infiltration
• High Temperature Chemical Interaction Between SSiC Substrates and Ag-Cu Based Liquid Alloys in Vacuo
• High Temperature Chemical Interaction Between SiO2 Substrates and Ag-Cu Based Liquid Alloys in Vacuo
• Synthesis of Al2O3-Ni3Al Cermets by Room-Temperature Ball Milling of Al, Ni and Al2O3 Mixtures
• High Temperature Oxidation of Cr-ZrO2-Al2O3 Composite Fabricated by Mechanical Alloying and Spark Plasma Sintering
• The Transformation of Co-Rich Alloys Produced by Mechanical Alloying
• Nanocrystalline Intermetallic Mg2Ni Produced in a Batch Scale Mill
• Use of Newton Thermal Analysis for the Prediction of the Amount of Microconstituents Formed during Solidification
• Newton Thermal Analysis of Gray and Nodular Eutectic Cast Iron
• Effect of Titanium and Strontium Addition on the Fluidity of A319 and A356 Aluminum Alloys
• Microstructural and Mechanical Characterization of Nitinol GTAW and FB Welds of Titanium
• Macro-Micro Modeling and Simulation of Solidification Kinetics of Pb-Sn Alloys
• Time-Dependent Rheological Behavior of Liquid Crystalline Dispersions
• Preparation of Size Controlled Nanometric Spheres of Colloidal Silica for Synthetic Opal Manufacture
• Bioactive Zirconia Composites
• Thermal Analysis and Evolution of Phases during the Synthesis of Cordierite with Kyanite and Talc
• Direct Extrusion Production of Monolithic Ceramics with Different Cross Section
• Biomimetic Process in Metals