Instructions for use:
1, After the first and every use, with hot water (diluted food detergent) or into the dishwasher cleaning. Do not use the abrasive cleaning agent or foam cleaning. Make sure that the silicone mould is completely dry before each use and before storage.
2, roasted silica gel mould should be placed on the flat baking pan. Do not let the mould dry baked, such as a six-mode, you only filled with three models, the other three mould must be installed on the water. Otherwise the mould will be baked bad, the service life will be reduced. In order to achieve the best baking, you can gently spray a small amount of anti-sticking pan oil to the first layer of the mould
3, when the baking is completed, please remove the entire baking pan from the oven, and baked products placed on the grid to be cool until completely cold to go.
4, silicone mould can only be used in ovens, roaster and microwave ovens, must not be used directly on the gas or electricity, or directly above the heating plate or barbecue below.
5, do not use the whole knife or other sharp instruments in the silicone, can not be heavy, pull, violent.
6, silicone mould (because of the electrostatic relationship), it is easy to absorb dust, if you will not use it in long time, you'd better place it on the carton with the shade.
7, in order to extend the service life, you should not immediately rinse with cold water once the mould get out of the oven.