400 Hair Extension Micro Copper Rings Drak Brown (Salon Grade) Copper Micro Rings for Applying Stick Hair 3.25mm at widest point (lip) x 7mm in length Suitable 0.5gram Stick Hair Copper Micro Rings: are 7mm in length which is twice as long as a standard micro ring, this extra length means that they can keep your extensions in for longer, they also have a lip at the end for easy insertion of the extension tip. The micro rings do not break hair or pull you own hair locks out. They are very light and look smaller than standard micro ring., for I-Tipped extensions use the small size for fine hair and the large size for thick hair. Application process: Before application, we recommend deep cleaning the client's hair without using conditioner or any oily base product. 1.Start sectioning client's hair from bottom to top . 2.Insert pulling hook through a micro ring, (flaired end down). 3.Hook a portion of client's hair with pulling hook and slide through the ring hole. 4.Hold the ring ½ inch from scalp and insert I or stick hair tip through the ring. 5.Apply pressure to flatten the ring using pliers. 6.The more you flatten the ring the better it will stay in but the more difficult it will be to remove. 7.Trim off excess tip of extension. Removing steps: 1.Put the ring vertically in the first groove of the micro ring pliers and apply pressure slowly. (even a very slight opening will allow the extension to be removed) 2.Finish - Slide out the extension hair after opening the ring.
Important notice: While we work to make sure that product information is correct, manufacturers can change their ingredient lists. Actual product packaging and materials may contain more and/or different information than that shown on our website. We strongly recommend that you always read labels, warnings, and directions before using or consuming a product and that you do not solely rely on the information on our website. If you are not happy with a product and have not used it you may return it at anytime for a full refund.