Hurry - Only 2 left in stock!
Type:Bare Lamp with Housing
Place of Origin: Shenzhen, China (Mainland)
> 1.Gather the necessary tools, screwdriver.
1.Gatn off TV or Projector.
1.Gatove Lamp Compartment Door.
1.Gatove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
1.Gatan Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fibre cleaning cloth to remove any loose dust from the lamp compartment.
1.Gatert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
1.Gatlace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
1.Gatet the lamp timer. Instructions on how to do this should be covered by the instruction manual.
1.Gat're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.