Hurry - Only 3 left in stock!
|
All Condar replacement screen packages contain TWO mesh panels, each 60cm wide. This is sufficient for an attractive natural drape effect on most fireplaces. Screens also have a series of 1.3cm rings and include a pair of Cool Grip black screen pulls at no extra charge. Screen packages DO NOT include hanging rods. HOW TO CHOOSE THE CORRECT SCREEN: A. If you have an existing mesh screen on your fireplace simply measure the height and width of the screen. When sizing your screen, remember to allow for ý inch hanger rings below the rod (hanger rings are NOT included in the height measurement of Condar screens). B. If you do not already have an existing mesh screen first determine how a new screen will hang from your fireplace. Does your fireplace already have a screen rod installed. If not, it is recommended that you consider purchasing a Condar Fireplace Rod and Valance Kit (see our separate listings for a 120cm kit or a 150cm kit). If you already have a rod installed, measure the height of your fireplace opening in inches. Allow 1.3cm for the hanger ring below the rod, and approximately 0.3cm clearance at the bottom. IMPORTANT: If the width of your fireplace opening is GREATER than 100cm , you may need a custom-fabricated fireplace screen to achieve a natural drape and sufficient overlap that most homeowners prefer and find attractive. If the height of your fireplace opening is TALLER than 90cm , you will need a custom-fabricated fireplace screen. Contact the Condar Company direct at 828-894-8383. extension 232 for more information regarding custom-fabricated fireplace screens. On staff is a custom screen specialist who can assist you with any question you have pertaining to custom fireplace screens.