NF608 Voltage Detector features and using tips:
If the NF608 Voltage Detector sensed the AC voltage, it will have continuous sound and LED light on
2. It can identify live wire and neutral wire, can detect the breakpoint in the circuit. Can sense open circuit, electrical cable switch, breakpoint and if the fuse has AC voltage.
3. The detector can detect the breakpoint of live wire and neutral wire.
To test live wire breakpoint: Use the detector to test the live wire, where the signal disappears is the breakpoint.
To test neutral wire breakpoint: first plug one electrical appliance between the neutral wire and live wire, then use the detector to detect the neutral wire, where the signal disappears is the breakpoint.
4. Non - contact sensing detecting, safe and reliable.
Note: NF608 Voltage Detector can't detect these electrical cables: the cable its insulation protection layer is Infiltrated by the water, the shielded electrical cable, the electrical cable in the pipe, the electrical cable behind the panel and the electrical cable in the Metal fence
NF-608 Voltage Detector Specification:
Indicators: LED and Tone
Voltage Range: 50VAC to 1000VAC
Frequency Range: 50Hz to 500Hz
Measurement Category: Category 1V,1000V per UL 61010
Temerature: 0 to 40 (32 to 104)
Less than 80% relative humidity(noncondensing)
Indoor use only
Battery: two 1.5 volt batteries(AAA, NEDA 24A or LEC LR03)(Battery not
included in the package)