Torque：15 kg·cm (6150ml·in) 6.6V;17 kg·cm (6980ml·in) 7.4V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm diameter)
The servo wire: 30cm(11.8inch) in length
1 x Digital servo
1 x 30cm servo wire
1 x Servo horn kit(as shown in the figure)
If you have any questions, please feel free to contact us at email@example.com
Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.
Direction for use:
PWM adjust the angle, the cycle is 20ms, Pulse width level with duty ratio 0.5ms~2.5ms is consistent with the angle range(0 degree~270 degree) of servo, which is in linear relationship. Generally speaking, our servo controller using the range of 500~2500 is consistent with the duty ratio 0.5ms~2.5ms of the output angle controlled by servo. In this way, the control precision of ours servos can reach 3us, the control precision can reach degree among the range of 2000 Pulse-Width.